Nanoparticles

Titanium Nanoparticles Nano Ti Powder CAS 7440-32-6

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



About Titanium Nanoparticles Nano Ti Powder:
Titanium nanoparticles are nanoscale particles (1-100nm) made of titanium dioxide. They are cheap to produce and have applications in optics, materials science, electronics, catalysis, pigments and biology.
Nano-titanium is also found in personal hygiene products such as deodorants, shampoos and toothpaste. The content of titanium dioxide in these products is usually between 1% and 10% by weight.
Although about 36 percent of these titanium-containing products are easily dispersed in water as stable colloids, their use is widespread and persistent discharge into common sewers is a potential problem for water treatment plants worldwide.
Titanium nanoparticles are currently used commercially in cosmetics and sunscreens to protect wearers from UV rays, which they absorb.
These particles are usually coated with silica or other non-toxic and stable layers to prevent or reduce the occurrence of photocatalytic effects.
Safety of nano titanium: There are some concerns regarding the safety of nano titanium. When applied to the skin, they enter the deepest part of the upper layer of the skin and collect in hair follicles. Cells and DNA are likely to be damaged when exposed to reactive oxygen species produced by photocatalysis. Biomedicalmaterialsprogram is a trusted global Titanium Nanoparticles Nano Ti Powder supplier. Feel free to send an inquiry about the latest price of Titanium Nanoparticles at any time. 

Product Performance of Titanium Nanoparticles Nano Ti Powder:

Titanium nanoparticles have a relatively high melting point (over 1,649 degrees Celsius), so it is a good refractory metal material. It has paramagnetism, and its electrical and thermal conductivity is very low.


Technical Parameter of Titanium Nanoparticles Nano Ti Powder:

Product NameMFPurityParticle SizeBulk DensitySSAColor
Titanium NanoparticlesTi99%80nm0.54 g/cm315 m2/gBlack

 

How is Titanium Nanoparticles Nano Ti Powder Produced?
Nano titanium powder as a kind of inorganic filler in the epoxy resin and dispersing stability and interfacial compatibility is poor but by mechanochemical method to solve this problem, you can adjust the speed, solid-liquid ratio, abrasive viscosity to explore different parameters, such as sanding process of titanium powder nano effect rule, through the analysis of the grinding law concluded the best grinding parameters. Under the guidance of this parameter, the micron titanium powder was refined with epoxy resin and polyamide as abrasive agents, and its surface was modified. The test results of particle size and contact Angle show that the particle size of titanium powder can reach less than 100nm and the surface hydrophilicity of titanium powder can be decreased by using epoxy resin and polyamide as abrasives.
 
Applications of Titanium Nanoparticles Nano Ti Powder:
Using nano-titanium can greatly extend the life of artificial joints, such as hips or knees, typically about 15 years before replacement is needed.
Nanoparticles are used to cover the artificial joint and provide a hard surface with better wear resistance. Similarly, other implants can be coated in this way to improve biocompatibility and reduce the risk of bacterial infection.
Nano-titanium powder can also be used for a variety of new coatings can be used for metal, non-repair agent metal materials.
Titanium as the only autonomic nerve has no effect on the taste of the metal, the coating can be widely used in the food industry.
Nano-titanium coating in petrochemical, food, mining machinery and other industries, the coating performance has been improved, and the cost increase is not much.

Storage Condition of Titanium Nanoparticles Nano Ti Powder:
The damp reunion will affect titanium nanoparticles dispersion performance and using effects, therefore, nano Ti powder should be sealed in vacuum packing and stored in cool and dry room, the titanium nanoparticles can not be exposure to air. In addition, the Ti Nanoparticles should be avoided under stress.

Packing & Shipping of Titanium Nanoparticles Nano Ti Powder:
We have many different kinds of packing which depend on the titanium nanoparticles quantity.
Titanium nanoparticles packing: vacuum packing, 1kg/bag, 25kg/barrel, or as your request.
Titanium nanoparticles shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.

Titanium Nanoparticles Nano Ti Powder CAS 7440-32-6插图



 

Titanium Nanoparticles Properties

Other Namestitanium nanopowder, titanium nano-particles,
titanium nano-powder, nanotitanium, nano-titanium
CAS No.7440-32-6
Compound FormulaTi
Molecular Weight47.86
AppearanceBlack Powder
Melting Point1660 ℃
Boiling Point3287 ℃
Poisson’s Ratio0.32
Solubility in H2ON/A
Thermal Expansion(25 °C) 8.6 µm·m-1·K-1
  
  

Titanium Nanoparticles Health & Safety Information

Signal WordDanger
Hazard StatementsH250
Hazard CodesP210-P231-P280-P302 + P334-P370 + P378-P422
Risk CodesN/A
Safety StatementsN/A
Transport InformationUN1383- class 4.2 – PG 1

Inquiry us

Resent Products