If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Introduction to Tantalum Carbide TAC Powder
Tantalum carbide
Oder
TaC
It is a light-brown metallic cubic crystal powder belonging to the sodium chloride cubic cristal system. The density is 14.3g/cm3.
Insoluble in water, insoluble with inorganic acid, soluble hydrofluoric acid, and nitric acids mixed acid and degradation. It has a strong oxidation resistance, and is easily melted by potassiumpyrosulfate to decompose. Superconductivity is demonstrated by its high conductivity and resistance to 30O at room temperatures.
Tantalum carbide This is used for powder metalurgical, cutting tools and chemical vapor deposition. It also makes hard-wear-resistant alloy cutting tools. The tantalum carbide sintered body has a golden color, and can be used to decorate watches.
Insoluble in water, insoluble with inorganic acid, soluble hydrofluoric acid, and nitric acids mixed acid and degradation. It has a strong oxidation resistance, and is easily melted by potassiumpyrosulfate to decompose. Superconductivity is demonstrated by its high conductivity and resistance to 30O at room temperatures.
Tantalum carbide This is used for powder metalurgical, cutting tools and chemical vapor deposition. It also makes hard-wear-resistant alloy cutting tools. The tantalum carbide sintered body has a golden color, and can be used to decorate watches.
| Tantalum Carbide TaC Powder Properties | |
| Other names | tantalum(IV) carbide, TaC powder |
| CAS No. | 12070-06-3 |
| Formula compound | TaC |
| Molecular Weight | 192.96 |
| Appearance | Powders from brown to dark brown |
| Melting Point | 3850degC |
| Boiling Point | 4780-5470 degC |
| Density | 14.3-14.7g/cm3 |
| Solubility of H2O | Insoluble |
| Exact Mass | 192.948 |
Tantalum Carbide TaC Powder Cas 12070-06-3
Preparation Methods for Tantalum Carbide TaC powder
1. For TaC powder, mix tantalum pentoxide and solid carbon ball mills. At 1700, the mixture should be reduced and carburized in an oxygen-free atmosphere (mainly vacuum or argon).
2. By heat treating in a non-oxidizing environment using the liquid precursor, nano tantalum caride powder was obtained. A small glass rod was used to stir 5mL of anhydrousethanol into a small vessel containing 0.50gTaCL5. The ultrasonic cleaner was heated to 55°C and operated at 40kHz. It produced 80W of power. After ultrasonic oscillation lasting 5-10 minutes, 0.10g nanoactivated carbon was added. The oscillation continued for 15-20min. Then, pour it into the crucible. Coat it well on the inner wall. Dry it with a hot fan. The crucible containing the sample was placed into a vacuum hot pressing furnace at 1300 in a 100Pa vacuum or hydrogen atmosphere. At 1400 in an argon atmosphere, the holding time is 0.55h, and the heating speed is 20/min. Use a brush to brush the products in crucible after the experiment.
3. Tantalum pentoxide can be converted to heat in the atmosphere Potassium pyrosulfate can be fused. Tantalum and carbon, or tantalum pentoxide, and black in an inert environment heated to 1900 reaction.
4. Use tantalum pentoxide or methane as reaction gas. Argon as the carrier. Silicon carbide resistance from external radiation heating, carbonization, or Tantalum Pentoxide combined with carbon black. Pressurized powder molding. Heating in hydrogen or vacuum.
Tantalum Carbide TaC Powder
It is widely used in industry as well as the military. It is used extensively in cemented carbide as an additive. Its main purpose is to inhibit the growth tungsten carbide particles and increase cemented carbide’s high-temperature strength.
Use as a hard coating on cutting tools to improve the chemical resistance or wear resistance of the base material.
It can be used by the military as a coating on jet engine turbine blades.
Its high conductivity allows it to be used as an electrode material by using electric discharge wires to create complex shapes.
The second phase of the particle reinforced metal matrix composites can be used in aerospace and metallurgy as well as for electric power, hydropower and mining.
Main Supplier for Tantalum-Carbide TaC Powder
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and Nanomaterials. They have over 12 years experience in producing super-high-quality chemicals, such as silicon powder.
Tantalum carbide TaC powder is available in high quality. Contact us today to make an inquiry. (brad@ihpa.net)
1. For TaC powder, mix tantalum pentoxide and solid carbon ball mills. At 1700, the mixture should be reduced and carburized in an oxygen-free atmosphere (mainly vacuum or argon).
2. By heat treating in a non-oxidizing environment using the liquid precursor, nano tantalum caride powder was obtained. A small glass rod was used to stir 5mL of anhydrousethanol into a small vessel containing 0.50gTaCL5. The ultrasonic cleaner was heated to 55°C and operated at 40kHz. It produced 80W of power. After ultrasonic oscillation lasting 5-10 minutes, 0.10g nanoactivated carbon was added. The oscillation continued for 15-20min. Then, pour it into the crucible. Coat it well on the inner wall. Dry it with a hot fan. The crucible containing the sample was placed into a vacuum hot pressing furnace at 1300 in a 100Pa vacuum or hydrogen atmosphere. At 1400 in an argon atmosphere, the holding time is 0.55h, and the heating speed is 20/min. Use a brush to brush the products in crucible after the experiment.
3. Tantalum pentoxide can be converted to heat in the atmosphere Potassium pyrosulfate can be fused. Tantalum and carbon, or tantalum pentoxide, and black in an inert environment heated to 1900 reaction.
4. Use tantalum pentoxide or methane as reaction gas. Argon as the carrier. Silicon carbide resistance from external radiation heating, carbonization, or Tantalum Pentoxide combined with carbon black. Pressurized powder molding. Heating in hydrogen or vacuum.
Tantalum Carbide TaC Powder
It is widely used in industry as well as the military. It is used extensively in cemented carbide as an additive. Its main purpose is to inhibit the growth tungsten carbide particles and increase cemented carbide’s high-temperature strength.
Use as a hard coating on cutting tools to improve the chemical resistance or wear resistance of the base material.
It can be used by the military as a coating on jet engine turbine blades.
Its high conductivity allows it to be used as an electrode material by using electric discharge wires to create complex shapes.
The second phase of the particle reinforced metal matrix composites can be used in aerospace and metallurgy as well as for electric power, hydropower and mining.
Main Supplier for Tantalum-Carbide TaC Powder
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and Nanomaterials. They have over 12 years experience in producing super-high-quality chemicals, such as silicon powder.
Tantalum carbide TaC powder is available in high quality. Contact us today to make an inquiry. (brad@ihpa.net)
