Advanced nanomaterials and chemicals for bio medical. |Biomedicalmaterialsprogram

Newsbiomedicalmaterialsprogram

Archives

Page 156/158

Boride Powder

Silicon Boride SiB6 Powder CAS 12008-29-6

CAS No. : 12008-29-6
EINECS No.: 234-535-8
Appearance: dark grey
Molecular Formula: SiB6
Molecular Weight: 92.952

About Silicon Boride SiB6 Powder:
Boron silicon (Silicon Hexaboride) is a shiny black-gray powder with a relative density of 3.0g/cm3 and a melting point of 2200°C. Silicon boride is a lightweight ceramic compound formed between silicon and boron. It is insoluble in water, resistant to oxidation, thermal shock, and chemical attack, especially with high strength and stability under thermal shock. The grinding efficiency is higher than that of boron carbide.

The SiB6 crystal structure includes interconnected icosahedrons (polyhedrons with 20 faces), icosahedral hexahedrons (polyhedrons with 26 faces), and isolated silicon and boron atoms. Compared to hexaboride, it is metastable. However, since crystal nucleation and growth are relatively easy, they can be prepared.

When heated in air or oxygen, the surface of SiB6 is oxidized, and it is attacked by boiling sulfuric acid and fluorine, chlorine and bromine at high temperatures. Silicon boride is conductive. The hexaboride has a low thermal expansion coefficient and a large nuclear cross-section for thermal neutrons. Feel free to send an inquiry to get the latest price if you would like to buy Silicon Boride SiB6 Powder in bulk.

Feature of Silicon Boride SiB6 Powder: 
1. Nano-silicon boride has high purity, small particle size distribution, high specific surface area.
2. The melting point up to 2230 °C. It can not be soluble in water and anti–oxidation and high resistance to chemical attack. especially in the high thermal impact and stability;
3. Grinding efficiency of silicon boride is higher than that of boron carbide, it can be used as abrasives, grinding and engineering ceramics such as nozzles, gas turbine blades and other different sintering conditions and sealing line

How is Silicon Boride SiB6 Powder produced?
A kind of step of preparing silicon boride powder is as follows:

Silicon powder with an average particle size of less than 1 micron and boron powder with an average particle size of fewer than 20 microns are mixed uniformly by a ceramic ball milling tank; the weight ratio of silicon powder and boron powder is 2.85-2.95:7.
After loading the crucible, put it into the gas protection furnace, pass in argon gas, and heat up to 1400-160 (TC, hold for 50-70 minutes;

At the beginning of heat preservation, put ASiCl4 into the furnace, 3-5ml per minute, dripping time 9-11 minutes;

After cooling, the final SiB6 powder product is obtained by crushing with a ceramic pot ball mill.

Application of Silicon Boride SiB6 Powder:
Main uses of silicon boride SiB6 Powder:
1. Used as various standard abrasives and grinding cemented carbides;
2. Used as engineering ceramic materials, as various standard abrasives, and grinding cemented carbide.
3. It is also used as engineering ceramic materials, sandblasting nozzles, and manufacturing blades of gas engines and other special-shaped sintered parts and seals.
4. Used as an anti-oxidant for refractory materials.

Storage Condition of Silicon Boride SiB6 Powder:
The damp reunion will affect SiB6 powder dispersion performance and using effects, therefore, silicon boride SiB6 powder should be sealed in vacuum packing and stored in cool and dry room, the silicon boride SiB6 powder can not be exposure to air. In addition, the SiB6 powder should be avoided under stress.

Packing & Shipping of Silicon Boride SiB6 Powder:
We have many different kinds of packing which depend on the silicon boride SiB6 powder quantity.
Silicon boride SiB6 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Silicon boride SiB6 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Silicon Boride Properties

Other Namessilicon hexaboride, SiB6 powder
CAS No.12008-29-6
Compound FormulaSiB6
Molecular Weight92.9515
AppearanceDark Grey to Black Powder
Melting Point1950℃
Boiling PointN/A
Density2.43 g/cm3
Solubility in H2OInsoluble
Exact Mass93.036391
  
  

Silicon Boride Health & Safety Information

Signal WordWarning
Hazard StatementsH315-H319-H335
Hazard CodesXi
Risk Codes36/37/38
Safety Statements26-36
Transport InformationN/A

Inquiry us

2022-11-03

Boride Powder

Calcium Nitride Ca3N2 Powder CAS 12013-82-0

About Calcium Nitride Ca3N2 powder
In most cases, calcium nitride is usually available in large volumes. Biomedicalmaterialsprogram provides a wide range of products for hydrogen storage research, advanced fuel cells, and battery applications. Hydrogen is easily produced from renewable energy sources and is the most abundant element in the universe. Hydrogen comes from many sources, such as solid fuels, water, and renewable materials. Hydrogen is non-polluting and will form harmless water during use. Challenges related to the use of hydrogen as an energy source include the development of safe, compact, reliable, and cost-effective hydrogen storage and transmission technology. Currently, hydrogen can be stored in three forms: compressed hydrogen, liquid hydrogen, and chemical storage. High purity, submicron and Nanopowder forms can be considered. Calcium nitride is the main raw material for high-end phosphors. This phosphor is more stable, has better performance, and has better effects at high temperature and high humidity. Last but not least, calcium nitride can also be used as a chemical treatment agent, which is the key to determining the performance of water-based mud. Feel free to send an inquiry to get the latest price if you would like to buy Calcium nitride in bulk.
How is Calcium Nitride Produced?
When calcium burns in the air, it forms Ca3N2 with the oxide CaO. The distilled fibrous metallic calcium is heated to 450°C in a purified nitrogen stream, and then the metallic calcium is nitrided into calcium nitride after 3-4 hours.
Depending on the preparation temperature, the obtained calcium nitride is black at 350°C, milky white at 350 to 1150°C, or golden yellow at 1150°C or higher. It is easy to identify the calcium nitride formed because it can react with moisture or water and produce calcium hydroxide and ammonia.
Applications of Calcium Nitride
Ca3N2 can be used for obtaining reactive nitride ions, Calcium hydride (a desiccant) can be produced by heating calcium nitride with hydrogen at temperatures above 350 °C.
Product Performance of Calcium Nitride Ca3N2 powder:
Calcium Nitride Ca3N2 powder possesses the characteristics of high purity and uniform particle size distribution. 
Calcium nitride hydrolyzes to give calcium hydroxide and release ammonia, it dissolves in dilute acids and decomposes in alcohol.
Technical Parameter of Calcium Nitride Ca3N2 powder:

Product NameMFPurityParticle SizeMelting PointDensityColor
calcium nitrideCa3N299%5-10um1195℃2.67g/cm3red-brown

Chemical Composition of Calcium Nitride Ca3N2 powder:

Ca3N2NCaSiOCFe
99%13%balance0.05%0.3%0.05%0.2%


Application of Calcium Nitride Ca3N2 powder:
Calcium nitride Ca3N2powder is the main raw materials of chemical reagents and high-end fluorescent powder.

Packing & Shipping of Calcium Nitride Ca3N2 powder :
We have many different kinds of packing which depend on the calcium nitride Ca3N2 powder quantity.
Calcium nitride Ca3N2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Calcium nitride Ca3N2 powder shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.

 

Calcium Nitride Properties

Other Namestricalcium nitride, Ca3N2 powder
CAS No.12013-82-0
Compound FormulaCa3N2
Molecular Weight148.25
AppearanceBrown Powder
Melting PointN/A
Boiling PointN/A
Density2.63 g/cm3
Solubility in H2ON/A
Exact Mass147.894
  
  

Calcium Nitride Health & Safety Information

Signal WordDanger
Hazard StatementsH260-H314-H318
Hazard CodesF, C
Risk Codes11-29-34
Safety Statements16-22-26-36/37/39-45
Transport InformationUN 3208 4.3/PG I

Inquiry us

2022-11-03

Elementary

Nano Ag Silver powder cas 7440-22-4

About Nano Ag Silver powder:
Nano Silver is a metal Silver with a particle size of nanoscale. Is Nano Silver healthy? The size of the nanosilver is mostly about 25 nanometers, which has strong inhibition and killing effect on dozens of pathogenic microorganisms such as Escherichia coli, Neisseria gonorrhoeae and Chlamydia trachomatis, and will not produce drug resistance. Made of nanometer silver and combed cotton fiber, cotton socks have good antibacterial and deodorant effects. Does Nano Silver kill germs? In addition to being able to release silver ions, silver nanoparticles can themselves kill bacteria. Silver nanoparticles can accumulate in the pits that form on the cell wall after they anchor to the cell surface. The accumulated silver nanoparticles can cause cell membrane denaturation.
Does Nano Silver kill good bacteria? Silver nanoparticles play an important role in the field of microelectronics because of their excellent electrical conductivity. Due to the surface effect and quantum size effect, silver nanoparticles also have some special applications, such as surface-enhanced Raman applications and medical applications.
Which is better nano silver or colloidal silver? Colloidal silver cannot be used with other beneficial agents and has a weak effect on the biofilm. Therefore, it does not do a sufficient job protecting enamel and balancing the oral biofilm by reducing acid. Nano Silver can be used at much lower concentrations and can penetrate biofilms with ease.
Nanosilver is a powdered silver elemental, particle size is less than 100nm, generally between 25-50nm. The properties of silver nanoparticles are directly related to their particle size. Studies have found that the smaller the particle size, the stronger the bactericidal performance. 
What are the side effects of nano silver? Silver nanoparticles may be absorbed through the lungs, intestine, and through the skin into circulation and thus may reach such organs as the liver, kidney, spleen, brain, heart and testes. Nanosilver may cause mild eyes and skin irritations. It can also act as a mild skin allergen.
Silver Nanopower/Nanopower is a versatile substance with pharmacological, antimicrobial, conductive and chemical uses. Nanopower is dissolved in a variety of solvents, including water, ethanol and isopropyl alcohol, to produce a convenient suspension. Research continues to reveal new applications for silver nanoparticles in areas such as biotechnology, medicine, electronics and manufacturing, where they often achieve the same end result as more expensive solutions. Biomedicalmaterialsprogram is a trusted global Nano Ag Silver powder supplier. Feel free to send an inquiry about the latest price of Nano Silver powder at any time.

Features of Nano Ag Silver powder cas 7440-22-4:
Silver/Ag nanoparticle is a kind of metallic silver with nano scale particle size.

Most of the nano silver has a particle size around 25 nm. According to the tests on Animals, there is no exhibition of being poisoned even if the dosage of silver nanoparticles is thousands of times used more than the standard dose.

Meanwhile, it helps to repair the damaged epithelial cells. What worth to be mentioned is that the antibacterial effects of Ag nanoparticles become more enhanced when in water, which is more effective to the treatment of diseases.
The experts believe that this nano silver anti-bacterial nanopowder can be widely used in the field of environmental protection, textiles and clothing, fresh fruit, food and health.
 

How is Nano Ag Silver powder produced?
There are many ways to prepare nano-silver, including the physical crushing method, vacuum condensation method and mechanical ball milling method. Chemical methods are reduction method, electrochemical reduction method, photoreduction method, gas-liquid two-phase method, hydrothermal synthesis method, precipitation method synthesis method, etc. The preparation methods of silver nanoparticles are gradually mature, and the cost and production efficiency have reached the level of large-scale industrial production. It can be predicted that as a new material, nano-silver particles will have a very broad development prospect in the fields of medicine, biology, environment and so on.
 
Applications of Nano Ag Silver powder:
Nanosilver particles (NSPs), are among the most attractive nanomaterials and have been widely used in a range of biomedical applications, including diagnosis, treatment, drug delivery, medical device coating, and personal health care. What is nano silver used for? Nanosilver is made up of silver nanoparticles. These particles serve as antibacterial and antifungal agents for industrial purposes, in water treatment, and in consumer products (such as clothing, cosmetics, childcare items, food containers, and many others).
1. The nano silver powder can be used as a pharmaceutical antibacterial, disinfectant;
2. Some of countries use Ag Nanoparticles for anti-AIDS drugs, mixed with zinc oxide powder for disinfection;
3. The nano silver powder used as a chemical catalyst.
4. Also, The nano silver powder used as Antivirus antibacterial material: adding 0.1% silver nanoparticles, the inorganic antibacterial powder, can play an important role in the suppression and killing of dozens of pathogenic micro-organisms such as Escherichia coli, Staphylococcus aureus.
5. Silver nanoparticles as a new anti-infective product which has broad-spectrum, non-resistance, free from the pH effects, antibacterial, durable, non-oxidized black and many other properties, Ag Nanoparticles can be widely used in medical, household fabrics and health care supplies.
6. Adding nano silver powder as antibacterial, anti-corrosion coating paint materials can also be used successfully in the construction and preservation of relics.
Manufacturers produce household items that utilize the antibacterial properties of silver nanoparticles. These products include nano-silver lined refrigerators, air conditioners and washing machines.
7. The nano silver powder for Other current applications: Toys, Baby pacifiers, Clothing, Food storage containers, Face masks, HEPA filters, Laundry detergent. Conductive slurry:
8. The nano silver powder is Widely used for wiring, encapsulation and connection in the microelectronic industry, silver nanoparticles play an important role in the minimization of electronic devices and circuits. Efficacious catalyst: silver nanoparticles can Greatly enhance the chemical reaction speed and efficiency, such as Ethylene oxidation. Biological pharmacy:
9. The nano silver powder can be used in cell death and gene diagnosis.

Storage Condition of Nano Ag Silver powder:
The damp reunion will affect Ag powder dispersion performance and using effects, therefore, silver Ag powder should be sealed in vacuum packing and stored in a cool and dry room, the silver Ag powder can not be exposure to air. In addition, the Ag powder should be avoided under stress.

Packing & Shipping of Nano Ag Silver powder:
We have many different kinds of packing which depend on the silver Ag powder quantity.
Silver Ag powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Silver Ag powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Nano Silver Powder Properties

Other NamesAgNPs, Ag NPs, Silver nanopowder, Silver nanocrystals, nano-silver
Silver nano-particles, Silver nano-powder, nanosilver
CAS No.7440-22-4
Compound FormulaAg
Molecular Weight107.87
AppearanceGray to Black Powder
Melting Point660 ℃
Boiling Point2162 ℃
Specific Surface Area5.37 m2/g
Solubility in H2ON/A
Thermal Expansion(25 °C) 18.9 µm·m-1·K-1
  
  

Nano Silver Powder Health & Safety Information

Signal WordWarning
Hazard StatementsH400-H410
Hazard CodesXn, N
Risk Codes22-36/38-50/53
Safety Statements22-60-61
Transport InformationUN 3077 9 / PGIII

Inquiry us

2022-11-03

Boride Powder

Nickel Boride Ni2B Powder CAS 12619-90-8

CAS No. : 12619-90-8
EINECS No.: 235-723-2
Appearance: powder
Molecular Formula: Ni2B
Molecular Weight: 128.2

About Nickel Boride Ni2B Powder:
Nickel Boride is a chemical compound of nickel and boron with the formula Ni2B. It is one of the borides of nickel. The formula "Ni2B" and the name "nickel boride" are often used for a nickel-boron catalyst obtained by reacting nickel salts with sodium borohydride. 
Nickel boride catalyst can reduce unsaturated ethers, alcohols, aldehydes, esters, amines and amides to their corresponding saturated compounds without hydrogenation reaction. Unsaturated nitriles can be reduced to primary amines, while epoxides remain unchanged. In addition to sodium borohydride, dimethoxyborane (Meo)2BH4 or lithium borohydride LiBH4 can react with nickel chloride to obtain nickel boride catalysts for such reactions. It is worth emphasizing that only NiCl2 showed catalytic activity in the combined catalytic reduction of 2-methyl quinoline by a variety of transition metal salts, such as CoCl2, NiCl2, CuCl2, CrCl3 and sodium borohydride. Feel free to send an inquiry to get the latest price if you would like to buy Nickel Boride Ni2B Powder in bulk.

How is Nickel Boride Ni2B Powder produced?
Nickel Boride Ni2B can be obtained (together with other nickel borides) by heating sodium borohydride with powdered nickel-metal up to 670 °C in a closed vessel so that the released hydrogen creates a pressure of up to 3.4 MPa. The main reactions can be summarized as
2NaBH4 ↔ 2NaH + B2H6
2Ni + 2B2H6 + NaH ↔ Ni2B + 3BH3 + 2H2 + Na
but other reactions occur, yielding other borides.

Application of Nickel Boride Ni2B Powder:
Nickel boride catalyst is prepared by the reaction of nickel chloride NiCl2 with boron hydrogen reagents such as sodium borohydride NaBH4. It can be used for selective hydrogenation reaction, desulfurization reaction, dehalogenation reaction, hydrolysis reaction, and reduction of nitro and other functional groups.
The nickel boride catalyst prepared by the reaction of NiCl2 and NaBH4 can also be used for desulfurization reaction. Compared with the Raney nickel catalyst used in the traditional desulfurization reaction, it can obtain a higher yield, and at the same time, it can avoid the disadvantages of Raney nickel such as strong alkalinity, flammability and sensitivity to air and moisture.
In addition, thioamides, sulfides and sulfides can all be desulfurized under the catalysis of nickel boride to obtain corresponding hydrocarbons
Primary, secondary, and tertiary aliphatic nitro compounds can be reduced to amines in the presence of nickel boride.
The NiCl2/NaBH4 combination also achieves dehalogenation and hydrolysis reactions, reducing many α-bromoketones to ketones, or dibromo ketones to olefines, and reducing benzyl, allyl, and propargyl esters to the corresponding alkanes.
 

Storage Condition of Nickel Boride Ni2B Powder:
The damp reunion will affect Ni2B powder dispersion performance and using effects, therefore, nickel boride Ni2B powder should be sealed in vacuum packing and stored in cool and dry room, the nickel boride Ni2B powder can not be exposure to air. In addition, the Ni2B powder should be avoided under stress.

Packing & Shipping of Nickel Boride Ni2B Powder:
We have many different kinds of packing which depend on the nickel boride Ni2B powder quantity.
Nickel boride Ni2B powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Nickel boride Ni2B powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Nickel Boride Ni2B Powder Properties

Other Names1-bora-2λ3, 3λ2-dinickelacyclopropene, dinickel boride,
Nikel Boride, Ni2B powder
CAS No.12619-90-8
Compound FormulaNi2B
Molecular Weight128.198
Appearancerefractory solid
Melting PointN/A
Solubility in waterN/A
Density7.9g/cm3
Purity99.00%
Particle Size325 mesh
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young's ModulusN/A
Exact Mass126.880001
Monoisotopic Mass126.879997253418 Da
  
  

Nickel Boride Ni2B Powder Health & Safety Information

Safety WarningDanger
Hazard StatementsH317-H350i-H372-H410
Flashing pointN/A
Hazard CodesT
Risk Codes22-50/53
Safety Statements53-26-36/37/39-45
RTECS NumberN/A
Transport InformationNONH for all modes of transport
WGK Germany3

Inquiry us

2022-11-03

Boride Powder

Molybdenum Boride MoB2 Powder CAS 12006-99-4

About Molybdenum Boride MoB2 Powder:
Molybdenum boride powder is a compound of molybdenum and boron.Their most notable feature is their high hardness. It has very high strength, very high hardness, good high-temperature resistance, good electrical conductivity and excellent oxidation resistance. Molybdenum boride has been used as a hard coating material for high-temperature structural applications and also in the form of Mob /CoCr cermet coatings. It is also used as a brazing material, especially in electronic components. Molybdenum boride has potential industrial application value, such as wear-resistance and corrosion resistance. Feel free to send an inquiry to get the latest price if you would like to buy Molybdenum Boride MoB2 Powder in bulk.

Molybdenum boride powder MoB2 Features:
CAS No. : 12006-99-4
EINECS No.: 234-502-8
MDL No.: MFCD00014219
Appearance: yellow grey crystal
Molecular Formula: MoB2
Molecular Weight: 202.69
Density: 9.26 g/ cm3
Melting point: 2280 ºC
Particle size: 5-10um

Application of Molybdenum Boride MoB2 Powder:
Molybdenum Boride (MO2B) is used for brazing (welding) special metals and non-corrosive electronic connectors and switches.
Molybdenum boride (Mo2B) is also used in the manufacture of high-speed cutting tools and mechanical corrosion-free, wear-resistant parts.
Molybdenum boride (Mo2B) is mainly used as an additive of electron tungsten and molybdenum alloy.
Molybdenum boride (Mo2B) can be used in the manufacture of wear semiconductor thin films and coatings.
 
Storage Condition of Molybdenum boride powder MoB2:
The damp reunion will affect MoB2 powder dispersion performance and using effects, therefore, molybdenum boride MoB2 powder should be sealed in vacuum packing and stored in cool and dry room, the molybdenum boride MoB2 powder can not be exposure to air. In addition, the MoB2 powder should be avoided under stress.

Packing & Shipping of Molybdenum boride powder MoB2:
We have many different kinds of packing which depend on the molybdenum boride MoB2 powder quantity.
Molybdenum boride MoB2 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Molybdenum boride MoB2 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Molybdenum Boride MoB2 Powder Properties

Other NamesMolybdenum monoboride, Borylidynemolybdenum, CAS 12007-27-1
(molybdenum diboride, MoB2)
CAS No.12006-99-4
Compound FormulaMoB2
Molecular Weight106.75
AppearanceGray to blue powder/pieces
Melting PointN/A
Solubility in waterN/A
Density9.20 g/cm3
Purity >99%
Particle Size5-10um
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young's ModulusN/A
Exact Mass108.914714
Monoisotopic Mass108.914711 Da
  
  

Molybdenum Boride MoB2 Powder Health & Safety Information

Safety WarningWarning
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK Germany3

Inquiry us

2022-11-03

Elementary

Supply Magnesium Granules Mg Granules 99.95%

About Magnesium Granules Mg Granules:
Magnesium Granules silvery-white metal (hexagonal system).The melting temperature of 648.5 ℃.The boiling point of 1107 ℃.Relative density 1_74.Soluble in inorganic acids, ammonium salts, insoluble in cold water, chromic anhydride, alkali. It decomposes in hot water to form magnesium hydroxide. In dry air does not lose luster, but in moist air, magnesium Granules will be oxidized into gray oxide film. The block is stable at room temperature, but the powder and debris have fire danger, should pay attention to handling. At high temperatures, blocks are otherwise prone to oxidation and combustion, and heat treatment and other operations should be carried out under the protection of sulfur dioxide or sulfur hexafluoride atmosphere. Biomedicalmaterialsprogram is a trusted global Magnesium Granules Mg Granules supplier. Feel free to send an inquiry about the latest price of Magnesium Granules at any time.

Product Performance of Magnesium Granules Mg Granules:

Magnesium granules are processed using 99.95% high-purity magnesium ingots as raw materials. The shape is spherical and has good fluidity. Magnesium granules have strong chemical activity and large affinity with oxygen. They are often used as reducing agents to replace metals such as titanium, zirconium, uranium and beryllium.


Technical Parameter of Magnesium Granules Mg Granules:

Product NameMFPurityParticle SizeBulk DensityMelting PointColor
Magnesium GranulesMg99.95%4 * 4mm1.74 g/cm3648.8℃Silver White

 

How is Magnesium Granules Mg Granules Produced?
The preparation method of magnesium Granules is as follows:
Milling method: the magnesium ingot milling processing into the required Granules size, after screening and grading, magnesium powder products.Process diagram: Magnesium ring a pickling a car end face a milling a wind pulsed separation a sieve grading different specifications of magnesium powder a mixer mixing a packaging inspection acceptance of a finished product.
Salting method: used to produce granular magnesium powder.Process diagram: magnesium ingot and potassium chloride mixing - melting - stirring out a magnesium grain and molten salt a jaw type crushing a shredder crushing screening of a magnesium grain a package of a finished product.
Non-salt coating method: also used to produce granular magnesium powder.Process diagram: magnesium ingot a milling a vortex mill crushing a wind transport a screening a inspection a packaging a finished product.
 
Applications of Magnesium Granules Mg Granules:
Magnesium Granules can be used to make fireworks and signal flares.
Magnesium Granules used as reducing agent, flash powder, lead alloy, metallurgy for sulfur removal agent, purification agent.
Magnesium granules are used as dehydrating agent for organic synthesis or as organic compounds for making magnesium directly from magnesium powder. Especially in recent years. Magnesium powder is more and more widely used in spraying and anticorrosion industries, and it is also used in monocrystalline silicon, polycrystalline silicon and metallurgical powder die-casting.

 

Storage Condition of Magnesium Granules Mg Granules:
Magnesium granules Mg granules should be sealed in vacuum packing and stored in the cool and dry room, the niobium carbide can not be exposure to air. 

Packing & Shipping of Magnesium Granules Mg Granules:
We have many different kinds of packing which depend on the magnesium granules Mg granules quantity.
Magnesium granules Mg granules packing: vacuum packing, 1kg/bag, 10kg/bag, or as your request.
Magnesium granules Mg granules shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.






 

Magnesium Granules Properties

Other NamesMg granules
CAS No.7439-95-4
Compound FormulaMg
Molecular Weight24.31
AppearanceGray
Melting Point650℃
Boiling Point1090℃
Density1738 kg/m3
Solubility in H2ON/A
Electrical Resistivity4.45 microhm-cm @ 20 °C
Poisson's Ratio0.29
Tensile StrengthN/A
Thermal Conductivity1.56 W/cm/K @ 298.2 K
Thermal Expansion(25 °C) 24.8 µm·m-1·K-1
Vickers HardnessN/A
Young's Modulus45 GPa
  
  

Magnesium Granules Health & Safety Information

Signal WordDanger
Hazard StatementsH250-H260
Hazard CodesF
Risk CodesN/A
Safety StatementsN/A
Transport InformationUN 1869 4.1 / PG III

Inquiry us

2022-11-03

Boride Powder

Vanadium Boride VB2 Powder CAS 12007-37-3

Product name: Vanadium boride
CAS number: 12007-37-3
MDL number：MFCD00049697
EINECS：234-509-6
PubChem：24860374
Molecular formula: VB2
Density: 5.1 g/ml,25/4℃
Melting point: 2450 °C
Hardness: 2800 (kg/mm2)

About Vanadium Boride VB2 Powder:
Vanadium Boride (VB2) has a hexagonal crystal structure with a melting point of 2980 degrees Celsius, a large oxidation temperature, a large hardness. VB2 has been proven to have a Gaver's hardness having 27.2 ± 1.5 GPa, high thermal stability in the air, and at the highest resistivity value (41 μΩcm) in the transition metal boride at room temperature in the transition metal boride. Feel free to send an inquiry to get the latest price if you would like to buy Vanadium Boride VB2 Powder in bulk.

How is Vanadium Boride VB2 Powder produced?
1. After mixing boron and niobium, press molding, and heat it in the heating furnace.
2. Adopt synthesis method. After mixing element boron and elemental bismuth, press molding, heating in the heating furnace
 
Application of Vanadium Boride VB2 Powder:
VB2 is also a nature of the nature of hard refractory ceramics and the properties of an excellent electrical conductor. Therefore, VB2 can be used as fine ceramic raw materials for producing wear-resistant and semiconductor films. Can be used in regions of conductive ceramic materials.

Specifications of Vanadium Boride VB2 powder:
Diboride vanadium (VB2) has a hexagonal crystal structure, a melting point of 2980 degrees Celsius, great hardness, resistance to oxidation temperature big 1000 degrees Celsius, can be used in areas such as conductive ceramic material, are atomic crystals.

Storage Condition of Vanadium Boride VB2 powder:
The damp reunion will affect VB2 powder dispersion performance and using effects, therefore, vanadium boride VB2 powder should be sealed in vacuum packing and stored in the cool and dry room, the vanadium boride VB2 powder can not be exposure to air. In addition, the VB2 powder should be avoided under stress.

Packing & Shipping of Vanadium Boride VB2 powder:
We have many different kinds of packing which depend on the vanadium boride VB2 powder quantity.
Vanadium boride VB2 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Vanadium boride VB2 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Vanadium Boride VB2 Powder Properties

Other NamesDiborylidynevanadium, Vanadium diboride, vanadium boride (1:2),
VB2 Powder, Vanadium Boride
CAS No.12007-37-3
Compound FormulaVB2
Molecular Weight72.564
Appearancerefractory solid
Melting PointN/A
Solubility in waterN/A
Density5.1 g/cm3
Purity>99%
Particle Size325 mesh
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young's ModulusN/A
Exact Mass72.962
Monoisotopic Mass72.962578
  
  

Vanadium Boride VB2 Powder Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A

Inquiry us

2022-11-03

Colloidal Silver Nano Silver Solution CAS 7440-22-4缩略图

Elementary

Colloidal Silver Nano Silver Solution CAS 7440-22-4

About Colloidal Silver Nano Silver Solution: Nano Silver solution is a metallic Silver elemental with a particle size of 1-100nm. The particle size of the nanosilver is mostly about 20 nanometers, and a few can reach less than 5 nanometers. With a broad spectrum of bactericidal effects, about 650 kinds of bacteria, and do not produce drug resistance. Animal experiments showed that even if the dosage of nano-silver antibacterial powder reached thousands of times aboutthe standard dosage, the tested animals had no toxic performance. At the same time, it can also promote the repair of damaged epithelial cells. It is worth mentioning that the antibacterial effect of this product is increasingly enhanced when it meets water, which is more conducive to the treatment of diseases. Nano-silver acting on cell membrane proteins can directly destroy bacterial cell membrane and oxygen metabolism enzyme (-SH), block bacteria and other microorganisms from the absorption of amino acids, uracil and other essential nutrients for growth, thus inhibiting their growth. This unique mechanism can kill most bacteria, fungi and other microorganisms. Nano-silver particles have super permeability and can quickly penetrate into the subcutaneous 2mm to sterilize, which has a good bactericidal effect on the deep tissue infection caused by common bacteria, stubborn bacteria, drug-resistant bacteria and fungi. Biomedicalmaterialsprogram is a trusted global Colloidal Silver Nano Sliver Solution supplier. Feel free to send an inquiry about the latest price of Nano Silver at any time. Product Performance of Colloidal Silver Nano Silver Solution CAS 7440-22-4: The nanosilver solution is a colorless & transparent liquid or light yellow, made of nanosilver that particle size is less than 2nm through nanotechnology. The colloidal silver is widely applicable for various fabrics including cotton, blending fabric, chemical fiber, non-woven fabric, leather, etc for washing-resistance antimicrobial purposes. Textile after treating will not affect origin handling, color or state, and the antimicrobial effect can maintain above 99% even after washing 50 times. Technical Parameter of Colloidal Silver Nano Silver Solution:
Product Name MF Purity Particle Size Bulk Density Melting Point Color
Colloidal Silver Ag 100ppm,1000ppm <10nm 10.49 g/cm3 961℃ light yellow
How is Colloidal Silver Nano Silver Solution Produced? The invention relates to a preparation method of nano-silver solution, in which the weight to part ratio of the main raw materials is AgNO3: reducing agent: Gellan glue: auxiliary agent: surfactant =0.8 ~ 1.2:0.8 ~ 0.5:0.5 ~ 1.8:1.8 ~ 2.2:2.8 ~ 3.2. Preparation steps: prepare the aqueous solution of AgNO3 and reducing agent respectively for standby; Mixed Gellan Gellan with NaCl or sugar according to the weight/part ratio of Gellan: NaCl/ sugar = 1:9-11, put it into the reactor of high shear dispersion emulsifier in the ultrasonic field, add water, heat it to 50 ~ 70℃, rotate speed of 500 ~ 700rpm/min, and stir to prepare mixed solution A. Add the auxiliary agent, continue to stir and mix; The surfactant was dissolved in hot water, and then added to the reactor, and continued to be stirred and mixed at a speed of 500 ~ 700rpm/min. The water solution of AgNO3 and the reducing agent was pumped into the reactor, the rotating speed was increased to 2000 ~ 3000rpm/min, and the nanometer silver solution with a particle size of 3 ~ 60 nm was prepared by continuous stirring for 0.5 ~ 24 hours. Applications of Colloidal Silver Nano Silver Solution: Colloidal nanosilver can be used in medical and health care, medical equipment, textile, paint, daily necessities, cosmetics, flowers, ecological environment and other fields. 1. Antibacterial finishing of textiles, paper products, leather and sponges; 2. Antibacterial and deodorant treatment for all kinds of shoes, toys and daily necessities; 3. It is suitable for antibacterial deodorization of various waterborne and oil-based coatings; 4. Widely used in the medical field: fungicides, medical hose, colloidal silver, lotions, tablets; Soap, cleaning supplies; Chemical building materials; Plastic products; 5. Nano colloidal silver can be added to PE, PP, PC, PET, ABS and other plastics to achieve antibacterial function. Storage Condition of Colloidal Silver Nano Silver Solution: Colloidal silver nanosilver solution should be sealed in vacuum packing and stored in a cool and dark place to avoid moisture and sunshine.  Packing & Shipping of Colloidal Silver Nano Silver Solution: We have many different kinds of packing which depend on the colloidal silver quantity. Colloidal Silver Nano Silver Solution packing: 30ml/ bottle, 100ml/ bottle, 250ml/ bottle, or as your request. Colloidal Silver Nano Silver Solution shipping: could be shipped out by express, by air, by air as soon as possible once payment receipt. 新包装.jpg

Colloidal Silver Nano Silver Properties
Other Names Colloidal Silver, Nano Silver, silver nano liquid
CAS No. 7440-22-4
Compound Formula Ag
Molecular Weight N/A
Appearance colorless & transparent liquid or light yellow
Melting Point N/A
Solubility in water N/A
Density 10.49 g/cm3
Purity 100ppm, 1000ppm, 2000ppm
Particle Size <10nm
Boling point 961℃
Specific Heat N/A
Thermal Conductivity N/A
Thermal Expansion N/A
Young's Modulus N/A
Exact Mass N/A
Monoisotopic Mass N/A

Colloidal Silver Nano Silver Health & Safety Information
Safety Warning N/A
Hazard Statements N/A
Flashing point N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

2022-11-03

Boride Powder

Tantalum Boride TaB2 Powder CAS 12007-35-1

About Tantalum Boride TaB2 Powder :
Tantalum diboride is a gray powder. Tantalum diboride is completely insoluble in acid, nitric acid and aqua regia. Slightly soluble in hot sulfuric acid and hydrofluoric acid, soluble in molten alkali and sodium carbonate. The Vickers hardness of the TaB2 film and crystal is about 30 GPa.These materials are stable to oxidation and acid corrosion up to 700°C.
TaB2 has the same hexagonal structure as most diborides (Alb 2, MGB2, etc.).It also has the following space groups: TAB (orthogonal-crystal system, iodized ((I), Cmcm), TA5B6 (Cmmm), TA3B4 (IMmm), TAB2 (hexagonal, aluminum diboride) type, P6 / mm2). Feel free to send an inquiry to get the latest price if you would like to buy Tantalum Boride TaB2 Powder in bulk.

How is Tantalum Boride TaB2 Powder produced?
Under vacuum or cylinder gas protection, the powder is prepared by reacting with the element boron, or the mixture of carbon and oxidizing load and boron oxide is made.
Single crystals of Tab2 (about 1 cm in diameter and 6 cm in length) can be produced by the floating zone method.
Tantalum boride films can be deposited from gas mixtures of Tacl 5-Bcl3-H 2-Ar at temperatures of 540 -- 800 °C.TAB 2 (single phase) is deposited at a feedstock gas flow ratio of six (BCL 3 / TACL 5) and at temperatures above 600°C.TAB (single-phase) was deposited at BCl 3 / TaCl 5 = 2-4 and T = 600-700°C.
Tab2 nanocrystals were successfully synthesized by reducing NaBH 4 to Ta 2O 5 with a molar ratio of 1:4 M: B at 700-900°C under argon.
Ta 2 O 5 + 6.5 NaBH 4 →2 TAB 2 + 4 Na (G, L) + 2.5 NaBO 2 + 13 H 2 (G)

Application of Tantalum Boride TaB2 Powder :
Tantalum boride is a compound of tantalum and boron and is noted for its extremely high hardness. Due to its high hardness, tantalum diboride can be used as high-temperature materials and abrasives, as well as wear-resistant coatings, semiconductor films, electronic materials, ceramic materials, rare earth materials, alloy materials, etc.
Tantalum diboride is a metallic luster crystal with a high melting point, wear-resistance and hardness. It is widely used in the fields of ultra-high temperature ceramic materials, hard materials or composite material reinforcement.
Tantalum diboride also has thermal and electrical conductivity and is used in the chemical industry, metallurgy, building materials, defense industry, agriculture and other departments.

Storage Condition of Tantalum Boride TaB2 Powder:
The damp reunion will affect TaB powder dispersion performance and using effects, therefore, tantalum boride TaB powder should be sealed in vacuum packing and stored in cool and dry room, the tantalum boride TaB powder can not be exposure to air. In addition, the TaB powder should be avoided under stress.

Packing & Shipping of Tantalum Boride TaB2 Powder:
We have many different kinds of packing which depend on the tantalum boride TaB powder quantity.
Tantalum boride TaB powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Tantalum boride TaB powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

CAS number:             12007-35-1
Einecs:                       234-496-7
Molecular formula:    TaB2
Molecular weight:     191.76
Mol file:                      12007-07-7.mol
Density:                      14.2 g/cm3
Melting point:            2040 º
Product name:          Tantalum boride
Other name:              TANTALUM BORIDE;
                                   Einecs 234-496-7;tantalumboride(tab);TANTALUM


Inquiry us

2022-11-02

Elementary

Colloidal Gold Nano Gold Solution CAS 7440-57-5

About Colloidal Gold Nano Gold Solution:
Nanogold is high purity gold as raw material, through a special new processing technology to make gold particle size of 15nm or less, greatly improve the inherent characteristics of gold, such as catalytic effect, free radical removal effect, dispersion effect and so on.
Gold, namely Gold, chemical element symbol Au, its high security, high stability, oxidation resistance, corrosion resistance and other characteristics.
Gold is one of the rarest and most precious metals. It has a face-centered cube structure and an atomic weight of 196.96654.
Melting point: 1064.43℃, boiling point: 2808℃, electronegativity: 2.54, covalent radius: 1.34A, ion radius: 0.85 (+3) A, atomic radius: 1.46A, atomic volume: 10.2cc/mol.
Gold can form alloys with many metals because the atomic radii of these metals are very close to the atomic radii of gold; The atomic radius of gold is 1.46 angstroms;1.46 Mr. Bi;1.44 Mr. Silver; Platinum 1.39 Mr.Thus gold can be formed in alloys of gold and silver, gold and copper, gold and platinum, etc. These alloys are not compounds, but solid melts. Biomedicalmaterialsprogram is a trusted global Colloidal Gold Nano Gold Solution supplier. Feel free to send an inquiry about the latest price of Nano Gold Solution at any time.

Product Performance of Colloidal Gold Nano Gold Solution CAS 7440-57-5:

Colloidal gold is prepared by dispersing 15nm or even smaller gold nanoparticles into the water solution. The preparation will end up with a uniform neutral solution with stable color. The nano gold solution appears to be faint red, not golden brown. The gold liquid appears to be azury when in the condensed state by adding other substances. The solution is edible for human beings and totally safe for skin contact. 
 

Technical Parameter of Colloidal Gold Nano Gold Solution:

Product NameMFPurityParticle SizeBulk DensityMelting PointColor
Colloidal GoldAu1000ppm5-15nm1.01 g/cm31064℃Purple

 

How is Colloidal Gold Nano Gold Solution Produced?
The steps of preparation of gold nanoparticles are as follows :
1) adding gold chloric acid in deionized water, and adding polyvinylpyrrolidone, sodium dodecyl sulfate, gold chloric acid, polyvinylpyrrolidone and sodium dodecyl sulfate at mass concentrations of 0.01 ~ 1.0%,0.02 ~ 2.0% and 0.0001 ~ 1.0%, respectively;
2) At room temperature, add 0.01 ~ 0.5% hydrazine hydrate aqueous solution to the mixed solution of Step 1) in stirring. When the pH value reaches 6.8 ~ 7.0, stop adding hydrazine hydrate aqueous solution and continue stirring for 20 ~ 30 minutes to get a gold nanoscale solution. The advantages of this preparation method are as follows: the preparation is carried out at room temperature, the process is simple, the particle size of the gold nanoparticles in the solution is 10-100nm, the gold particles are small, and it is not easy to precipitate.
 
Applications of Colloidal Gold Nano Gold Solution:
The unique biochemical and physicochemical properties of gold nanoparticles enable them to play a unique role in immunoanalysis, biosensors, DNA recognition and detection, gene and many other aspects. Gold nanorods have a strong adsorption function on proteins and DNA, and will not change the properties of the adsorbed substances. As a carrier with excellent properties, gold nanorods have also been widely studied.
Coloring agent for food, glass and living organisms.
A technique for genetic identification.
It is used for refining environmental purification products.
A preservative used in food and cosmetics.
Add to the cosmetics to whiten, anti-aging, moisturizing effect.
Production of antimicrobial, bacteriostatic, anti-inflammatory drugs, medical equipment, health supplies, beauty care equipment.
We produce all kinds of daily necessities, food and drinks which are closely related to people's life. If nanometer gold soap, toothbrush, all kinds of the facial mask of beauty.

Storage Condition of Colloidal Gold Nano Gold Solution:
1. Colloidal gold should be prevented from sunlight.
2. The product is for research and development purpose and the user must be a professional person ( This person must know how to use this product. )
3. Nanoparticle solutions are suspensions of nanoparticles in water. These dispersions can be used as-is or diluted with suitable (compatible) solvents. Nanoparticles in dispersions can sometimes settle upon storage, in which case they can be mixed (shook up) before use.

Packing & Shipping of Colloidal Gold Nano Gold Solution:
We have many different kinds of packing which depend on the colloidal gold quantity.
Colloidal Gold Nano Gold Solution packing: 100ml/ bottle, 250ml/ bottle, 1000ml/ bottle or as your request.
Colloidal Gold Nano Gold Solution shipping: could be shipped out by express, by air, by air as soon as possible once payment receipt.

Colloidal Gold Properties

Other Namesgold colloid solution, gold nanodispersion,
gold nanoparticle dispersion
CAS No.7440-57-5
Compound FormulaAu
Molecular Weight196.97
AppearancePurple Liquid
Melting Point1064.43℃
Boiling Point3080℃
Density19.3 g/cm3
Solubility in H2ON/A
Electrical Resistivity2.214 microhm-cm @ 20 °C
Poisson's Ratio0.44
Tensile StrengthN/A
Thermal Conductivity3.18 W/cm/K @ 298.2 K
Thermal Expansion(25 °C) 14.2 µm·m-1·K-1
Vickers Hardness216 MPa
Young's Modulus79 GPa
  
  

Colloidal Gold Health & Safety Information

Signal WordN/A
Hazard StatementsN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
Transport InformationNONH

Inquiry us

2022-11-02

  • ← Previous
  • 1
  • ...
  • 154
  • 155
  • 156
  • 157
  • 158
  • Next →