Tag: dioxide

Page 1/1

Email: inquiryartista2020@gmail.com


    What is Manganese Dioxide MnO2 Powder?

    Introduction to Manganese Dioxide, MnO2 powder Manganese dioxide Also known as black manganese oxide or manganese-peroxide, it is also called manganese. It is an oxide form tetravalent mannese. MnO2 is the chemical formula. The chemical formula is MnO2. Natural MnO2 is found in pyrolusite. It is a black-brown rhombic crystal, or powder. It has a tetrahedral, which is amphoteric Manganese oxide. It is insoluble when dissolved in water and in nitric acid. However, it releases oxygen and forms manganese oxide in hot concentrated sulfuric acids. It is fused to caustic soda and oxidant, releasing carbon dioxide to make permanganate. Manganese dioxide can cause combustion or explosion by friction or coheating with organic matter, or other oxidable substances, such as sulfur, the sulfide or phosphide. It is easily reduced by strong oxidants, such as hydrogen peroxide. MnO2 can be converted to Mn2O3 by heating it above 480 in the air and Mn3O4 by heating it above 900. It is widely used for steelmaking, glass, ceramics etc.

    It can be found in the forms of pyrolusite, hard manganese ore and other natural forms. You can extract it from pyrolusite. You can also prepare it by heating manganese nitrate salt or electrolytic magnese dioxide. g -Mno2 has an active component and can be used for cathodes in batteries to prevent polarization. Manganese dioxide can also be used to remove rust, oxidize, dry battery drying agents, and paint drying agents. It is also used in the preparation of manganese salts, as well as in the glass industry.

    Manganese Dioxide MnO2 powder - Physical and Chemical Properties
    For manganese dioxide Oxygen atoms are located at the corner of the Octahedron, and manganese is in the Octahedron. Octahedrons can be linked to form a single or double chain. This creates a tunnel structure in the gap, octahedron and hexagonal dense, respectively. Oxidizability Manganese dioxide is an organic non-salt, non-amphoteric and non-amphoteric compound that doesn't react with acids or bases. The presence of reducing agent can cause oxidizing. To make manganese oxide, you can heat hydrogen flow heating to 1400K. Manganese dioxide heats in ammonia gas streams to produce brown and black manganese triooxide. Concentrated hydrochloric acid is used to react manganese dioxide with chlorine gas and water.

    It can also display oxidation reactions in the presence strong oxidants Reductibility . When the potassium nitrate and manganese carbonate are mixed melting, people get dark green melt. After cooling it in water, they can get six valences manganese compound potassium magnate. It is a strong acid medium oxidant. Although it does not burn, it is strong oxidant and can be used in an acid medium to aid combustion.
    Manganese Dioxide MnO2 Powder Properties
    Other Names manganese oxide, MnO2 powder
    CAS No. 1313-13-9
    Formula compound MnO2
    Molecular Weight 86.94
    Appearance black powder
    Melting Point 535degC
    Boiling Point N/A
    Density 5.03g/cm3
    Solubility of H2O Insoluble
    Exact Mass 86.9279
    Manganese Dioxide MnO2 CAS 1313-13-9

    Applications of Manganese Dioxide, MnO2 powder
    1. Manganese dioxide is an excellent decolorizing agent for the glass industry. It can oxidize low iron salt to high ferric sodium, so the blue-green glass becomes weak yellow.
    2. It is used in electronic manufacturing to produce magnetic materials made of manganese, zinc ferrite and other metals.
    3. This is used in the manufacture of iron and manganese alloys and as a heating agent for the casting industry.
    4. Gas masks that absorb carbon monoxide.
    5. It is used in the chemical sector as an oxidant or catalyst for organic synthesizing, paint, and ink dericcant.
    6. It is used as an accelerant in the match industry, and as a raw ingredient for glaze medicine for ceramics, enamel, manganese salt.
    7. It is used for dyeing, water purification and iron removal.
    8. An excellent depolarizing agent for batteries is electrolytic manganese oxide. It has a higher discharge capacity than the dry battery made from natural discharge manganese dioxide and a shorter life span. This makes electrolytic manganese a valuable raw material in the battery industry.
    9. Because of its strong catalytic and oxidation/reduction, Ion Exchange, and Adsorption capacities, it makes a great water purification filter material. It is more effective at removing and decolorizing metals than activated carbon and zeolite.

    Main supplier of Manganese Dioxide, MnO2 powder
    Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and Nanomaterials. They have over 12 years experience in producing super-high-quality chemicals, such as silicon powder.
    High-quality products are what you want manganese dioxide MnO2 powder Please feel free and contact us to send an inquiry. (brad@ihpa.net)


    Application Fields of Manganese Dioxide

    Chemical characteristics of manganese dioxide MnO2 Manganese oxide is the oxygen-atom at the top, and the manganese-atom in the octahedron. A single or double chain is formed when the [MnO2] Octahedron connects to the manganese. The face may form either a hexagonal or square dense product. The process of oxidizing manganese dioxide (also known as non-salt-forming oxide or non-amphoteric) is called "oxidizing". It reacts with reducing substances to become oxidizing. Manganese dioxide can be heated to 1400K in a stream with hydrogen to make manganese oxide. To get brown-black manganese trioxide, it is heated to the same temperature in ammonia. The manganese dioxide is then reacted to concentrated hydrochloric acids to create l chlorine Manganese and chlorine.
    It can also be reduced when it comes into contact with strong oxidants. When manganese dioxide and potassium carbonate or potassium nitrate are combined and melted, you can get a dark green melting solution. This can then be dissolved into water and cooled to produce potassium manganate. It is a strong acid medium oxidant. Strong oxidizer. It does not burn by it self, but supports combustion. Do not combine it with flammable substances.

    The primary function of manganese dioxide MnO2
    Manganese dioxide is mostly used in dry batteries as a depolarizing agents. Manganese oxide is also an excellent decolorizing agent for the glass industry. It can turn low-valent iron sodium salts into high iron salts. Use in electronics industry to create manganese zinc ferrite magnetic materials. This is used as a raw ingredient in iron-manganese alloys in the steelmaking process and as a heat-increasing material in the casting industry. A gas mask absorbent that reacts with carbon monoxide. It is used in chemical industries as an oxidant and a catalyst for organic synthesizing. It is also used in the match trade as a combustion aid, as well as as a raw ingredient for ceramics, enamel glazes, manganese salts, and ceramics. It's also used for fireworks, water purification, iron removal, medicine and textile printing and dyeing.
    Dilute hydrochloric Acid will not react with manganese dioxide. Concentrated hydrochloric acids have a large concentration of H+/Cl-, which has strong reducibility. It can be oxidized using MnO2 under heat to form Cl2. As the reaction progresses, it gradually decreases in H+ and Cl. As the reducibility decreases, MnO2 is unable to oxidize Cl. Dilute hydrochloric and manganese dioxide will not react. Hot concentrated sulfuric acids releases oxygen to form manganese-sulfate. Mix caustic soda, oxidant and co-melt to make manganate. It dissolves in acetone.
    The electrolytic manganese oxide can be divided into three types: the normal type, the alkaline type and the mercury-free alkaline type. The alkaline manganese is suitable to alkaline zinc batteries. The alkaline manganese is suitable to alkaline zinc batteries. A manganese dioxide battery.

    Application fields for manganese dioxide MnO2
    The best battery depolarizer is electrolytic magnese dioxide. It is a superior battery depolarizer than dry manganese dioxide batteries. It has large discharge capacities, high activity, and a small size. It is therefore an important raw material for industry.
    The main raw material for batteries is electrolytic manganese dioxide. However, it has been extensively used in other areas such as oxidizers and raw materials in manganese zinc ferrite soft magnetic materials. It is capable of strong catalysis and oxidation/reduction, as well as ion exchange, and adsorption. After treatment and molding, it is a water purification material with excellent performance. It is more resistant to metal removal than water filter media.

    Tech Co., Ltd. is a professional oxide powder supplier. It has over 12 years' experience in chemical products development and research. We accept payments via Paypal, T/T or West Union. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
    We can provide high-quality titanium diboride powder. Please contact us to send an inquiry.


    The applications of Manganese Dioxide Powder

    Overview of Manganese Dioxide Pulver
    Manganese dioxide This inorganic compound has the chemical formula of MnO2. It is found in nature as pyrolusite. Physical properties: Amorphous black powder, or black orthorhombic black crystals. Solubility in water, weak acid, weak basis, and cold sulfuric acid. Heating and crushing concentrated hydrochloric acids to produce chlorine.
    MnO2 (alpha polymorph) is able to bind various atoms and water molecules within the "tunnels", or "channels" that exist between the manganese dioxide octahedrons. People are interested in MnO2 as a cathode to lithium ion battery batteries.
    Amphoteric oxide manganese dioxide. It is a stable, black powdery substance at room temperature that can be used as depolarizer to dry batteries. It is commonly used in laboratory to produce chlorine by its oxidizing property and the action of concentrated hydrogen chloric acid. Manganese oxide is an acid medium strong oxidant. Manganese dioxide is an [MnO2]-octahedron. The top of the Octahedron has the oxygen atom and the bottom is the manganese. [MnO2] Octahedrons may be joined to create single or double-stranded strands. These chains, together with other chains, form an octahedral (or hexagonal close packed) or square close-packed tunnel structure.
    Manganese dioxide can be described as an amphoteric oxygen. The perovskite structures also contain corresponding salts such as BaMnO3 / SrMnO3 which are obtained through a compound react in a molten acid system. Also, there is manganese Tetrachloride.
    Manganese Dioxide MnO2 CAS 1313-13-9
    What are the applications of Manganese Dioxide Pulver?
    Useful as a dry battery depolarizer, catalyst and oxidant in synthesis, coloring agent, decolorizer and iron removal in the enamel and glass industries. Used in the manufacturing of metal manganese. It is also used in the rubber industry to increase rubber's viscosity. It can also serve as a catalyst for chemical experiments.
    Organic synthesis
    Organic chemistry uses manganese dioxide extensively. Manganese dioxide can be used to make oxides in a variety of forms. Manganese dioxide can be described chemically as MnO2*x[H2O]n. This is because it has multiple crystal forms. However, n may be greater than 0. You can make manganese dioxide by reacting potassium permanganate with manganese sulfate at different pH.
    Conversion of alcohols into aldehydes is one of the special chemical reactions that manganese dioxide performs. Manganese dioxide won't oxidize alcohols that have a double bond.
    No matter how active the product, it won't be oxidized. Manganese dioxide is capable of oxidizing diols into dialdehydes. Manganese dioxide also has many other reactions that can be used for oxidizing aromatics, trils, and amines.
    Laboratory use
    As a catalyst in the decomposition and production of oxygen from hydrogen peroxide; as a catalyst in the heating of potassium chlorate to heat to create oxygen; thermite reaction to produce manganese. It is used in the production of pigments such as yellow glass and other colors. To produce chlorine, react with hot concentrated hydrochloric Acid in the air; to produce potassium manganate in the reaction of potassium permanganate in the ground.
    The main supplier of Manganese Dioxide Powder
    Tech Co., Ltd. () is a professional oxide powder Over 12 years' experience in chemical product development and research. We accept credit cards, T/T and West Union payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
    You can find high-quality powdered boron carbide here Please contact us Send an inquiry


    Organic Modification of Titanium Dioxide and Its Influence on the Properties of Engineering Plastics

    What is Titanium Dioxide exactly?

    Titanium dioxide is an important organic chemical pigment. Its main component is titanium dioxide. Two process methods are used to make titanium dioxide. One is the sulfuric acid process and one is the chlorination process. It's used extensively in coatings.

    The performance of engineering plastics depends on many factors.

    The defects in titanium dioxide, as well as the strong polarity of the surface, make titanium dioxide easy to absorb water. It is also easy to agglomerate and agglomerate during storage, production, and transport. This limits its use in organic polymers. The key to wide-ranging use of titanium dioxide is surface modification to increase its dispersibility and compatibility in organic polymers. It is necessary to perform organic modification in order to improve the wetting, dispersion, and rheological characteristics of titanium dioxide in different dispersion media.

    1. The Lab value of titanium dioxide powder is not affected by the use of polysiloxane, polysiloxane, or polyol organic modifier to treat it. However, oil absorption indexes of the product are reduced.

    2. The titanium dioxide that has been treated with polysiloxane is hydrophobic, which increases its compatibility with plastics resins.

    3. Polyols modified titanium dioxide are hydrophilic. They absorb moisture easily, which can affect the plastics' application performance.

    4. In ABS resin systems, titanium dioxide is treated with polysiloxane. This has the most impact on the mechanical characteristics of plastic products. The material's tensile strength and impact resistance are also the best.

    5. To enhance the material's overall performance, it is recommended to modify titanium dioxide in engineering plastics by using polysiloxane modifiers. Additionally, organic modifiers that contain different groups should be chosen according to the different applications.

    Tech Co., Ltd. is a TiO2 powder supplier. It has over 12 years' experience in chemical product development and research. We accept credit cards, T/Ts, West Union, and Paypal payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.

    Send us an inquiry if you are interested in high quality TiO2 Powder.


    How much do you know about manganese dioxide?

    What is Manganese dioxide? Manganese dioxide, an inorganic compound with chemical formula MnO2, is found in nature in the form pyrolusite. Physical properties: Amorphous black powder or black orthorhombic Crystals. Solubility: Not soluble in water. Manganese dioxide can also be used to prepare manganese salt.
    Does manganese dioxide have a different name?
    Manganese dioxide. Manganese(IV) oxide. Other names Pyrolusite. Also known as hyperoxide manganese.
    Why isn't MnO2 a peroxide.
    Peroxides are composed of two oxygens that are connected by one bond. It is impossible to bond MnO2 oxygens by using X-rays or neutron diffraction.
    Peroxide has long been known to be a ligand of transition metals. But, the distinction between superoxide and peroxide is sometimes unclear. in some cobalt compounds. You might find CrO5 in your lab as a chromium(VII), oxide peroxide.
    What are some properties of manganese dioxide?
    Physical properties: Amorphous black powder or rhombic black crystals. Solubility : This product is not easily dissolved in water, weak acid, weak base, or cold sulfuric acids. It can be dissolved in concentrated hydrochloric Acid under heating to create chlorine gas.
    Chemical properties: Manganese dioxide is an amphoteric oxygen. The salt is also available as a perovskite, such as BaMnO3/SrMnO3, which can be obtained through a compound reaction using molten alkali systems. You can also find manganese Tetrachloride.
    Application of manganese dioxide
    Ceramic Industries can use manganese dioxide to make glass. Almost all glass raw materials contain iron, often in the form foric oxide.
    The manganese ores are not active enough to be used directly in dry cell production.
    To remove the green tint from iron impurities, manganese dioxide can also be used in glassmaking.
    Battery components can include manganese dioxide. The Leclanche cells are surrounded by carbon and manganese dioxide.
    Can manganese dioxide cause cancer in humans?
    If swallowed or inhaled, can cause serious health problems. Eye, skin and respiratory tract irritation may occur. May cause central nervous system effects. Metal-fume fever can be caused by inhalation.
    Manganese dioxide Supplier
    (aka. Technology Co. Ltd. (aka. Our company has developed a number of materials. Our company produces high-quality manganese dioxide. To contact us, send an email or click the requested products link.


    What is Manganese Dioxide MnO2 Used For?

    What is Manganese Dioxide (MnO2)? Manganese dioxide Is an organic compound with the molecular structure MnO2. This black-brown solid is the natural mineral Pyrolusite.
    MnO2's main application is in dry batteries like alkaline batteries or zinc-carbon battery. Manganese dioxide also serves as a pigment, and as a precursor for other manganese compounds such as potassium permanganate. It can be used in organic synthesis as a reagent, such as for the oxidation allyl alcohol.

    What's Manganese Dioxide MoO2 used for?
    It can be used as a dry-cell depolarizer.
    These are used as catalysts and/or oxidants in the synthetic industries.
    These agents are used in the glass and enamel industries as colorants, bleaching agents and iron removal agents.
    It is used for the manufacture of manganese, special alloys, ferrromanganese castings and gas masks.
    This is used to improve the viscosity in rubber.

    Organic synthetic use
    Organic chemistry uses manganese dioxide extensively. Manganese oxide can be used in various forms. This is because manganese dioxide has multiple crystalline forms. The chemical formula for manganese dioxide can simply be written as MnO2*xH2O (N), where x can range from 0 to 0.5 while n can be greater or less than 0. Manganese dioxide can also be made from potassium permanganate, KMnO4, and Manganese sulfurate (MnSO4) at various pH values.
    The conversion of alcohols and aldehydes is one specific chemical reaction to manganese oxide. Manganese dioxide won't oxidize alcohol with a double bond.
    No matter how active a product may be, it will not be oxidized again. Manganese dioxide can convert diols into dialdehyde. There are many other reactions that manganese dioxide can perform. These include the oxidation and synthesis of aromatic substances and trils.

    Laboratory use
    Used to catalyze the decomposition and production of oxygen from hydrogen peroxide. It is used as a pigment, yellow and glass. Reaction of hot concentrated hydrochloric acids to produce chlorine gas. Reaction of molten potash in the atmosphere to prepare potassium magnate. Manganese dioxide acts as a self-catalyst to potassium permanganate during the decomposition reaction.

    Is MnO2 explosive?
    It reacts violently when exposed to combustible, reductive substances. This causes fire and explosion hazards.

    Is Manganese Dioxide Harmful?
    Strong oxidant. Contact with other materials can cause a fire. Harmful through inhalation or swallowing. It can cause irritation to the eyes, skin, and respiratory tract. May cause central nervous system effects. Inhaling smoke can cause metal smoke fever. It may have adverse effects on reproduction, according to animal studies.

    MnO2 Prices
    Price is affected by many factors, including supply and demand, industry trends and economic activity.
    You can email us to request a quote for the latest HTML2 price. (brad@ihpa.net)

    MnO2 Provider
    Technology Co. Ltd. is a trusted global supplier of chemical materials and manufacturer. With over 12-years experience in producing super-high-quality chemicals & nanomaterials such as silicon powders, nitride dust, graphite particles, zinc sulfide, calcium nitride and 3D printing material, Technology Co. Ltd.
    Send us an inquiry if you are interested in high-quality MnO2. (brad@ihpa.net)


    The Applications of MnO2 Powder

    How do you define it? MnO2 Oil ? Manganese dioxide has an inorganic chemical compound, MnO2. It comes in the form of a black powder, or an orthorhombic crystal. It is not soluble in water, weak acid or weak base and cold sulfuric acids. Used as an oxidant and rust remover.
    These are some of the properties of MnO2 Pulver
    1. pH and Alkalinity. Manganese dioxide is both an acidic and alkalinic oxide. This is a stable, black powdery liquid at room temperatures and can be used for depolarizing dry batteries. The laboratory uses its oxidizing ability to make chlorine gas. It acts with concentrated HCl.
    2. Manganese dioxide can be described as an amphoteric ore, with corresponding salts such as BaMnO3 / SrMnO3 (derived from a compound reaction in an alkali system), [1], and also manganese tetrachloride. .
    3. The reaction of a reducing agent with an oxidizing agent is known as oxidizing. In order to produce manganese oxide (manganese dioxide), heat the manganese in a hydrogen stream at 1400K. Then, in an ammoniastream, heat manganese dioxide to create brown-black trioxide. Finally, react with concentrated hydrochloric acids to form chloride manganese and chlorine.
    4. The strong oxidants also have a reduced form. When manganese dioxide is mixed with potassium carbonate or potassium nitrate, it can melt to form a dark brown melt. Once the melt has cooled, you can dissolve it in water to get potassium manganate. It can cause severe oxidation in an acidic environment.
    5. This is a powerful oxidant. It does not go out by itself and supports combustion.
    6. It acts as a catalyst for the decomposition of potassium chlorate [KClO3] and hydrogen peroxide [H2O2]
    Manganese Dioxide Properties
    Other Titles manganese oxide, MnO2 powder
    Compound Formula MnO2
    Molecular Weight 86.94
    Appearance Black Powder
    Melting Point 535 degC
    Boiling Point N/A
    Density 5.03 g/cm3
    Solubility of H2O Insoluble
    Exact 86.9279
    Manganese Dioxide MnO2 CAS 1313-13-9
    Application of MnO2 Pulver
    1.Organic Synthesis
    In organic chemistry, manganese dioxide can be very helpful. The chemical formula for manganese oxides can be expressed as MnO2x(H2O),n. This is because manganese dioxide has many crystalline forms. You can make manganese dioxide by reacting potassium permanganate with manganese sodium sulfate at different pH.
    The conversion of alcohols and aldehydes is one chemical reaction that manganese dioxide has. No matter how double-bonded alcohols are, manganese dioxide won't oxidize them. The product will not again be oxidized, no matter how active it may be. By using manganese dioxide, diols can become dialdehydes. You can use manganese dioxide to react with many other compounds, such as aromatics and triols.
    2.Laboratory use
    When hydrogen peroxide decomposes to produce oxygen, it's used as an catalyst. Useful for pigments, yellow glasses, and other purposes. To produce chloride, heat concentrated hydrochloric Acid in hot water. Also react in air with potassium hydroxide to create potassium manganate. Manganese dioxide is used to decompose potassium permanganate.
    Main supplier for MnO2 Powder
    Luoyang Tech Co., Ltd. is a company that specializes in professional IT services. Oxide powder Over 12 years' experience in developing and researching chemical products. You can pay by Credit Card, T/T or West Union. We will send the items to overseas customers via FedEx or DHL.
    You can find high-quality, high-quality boron carbonide powder here Please contact us You can also send us an enquiry


    Why molybdenum disulfide is an important solid lubricant?

    What's molybdenum diulfide? Molybdenum disulfide Is insoluble with water, dilute and concentrated sulfuric acids. It is also insoluble when mixed with other acids or organic solvents. But, aqua regia, boiled concentrated sulfuric, and water will dissolve it. To produce molybdenum dioxide, slow oxidation takes place at 400 Ferrotitanium is a good reagent to check the produced molybdenum triooxide. The first step is to treat the product in sodium or potassium hydroxide solutions (this will turn molybdenumtrioxide into molybdate). Next drop ferrotitanium, which will react to the sodium or potassium molybdate and produce the golden yellow solution. You can detect trace molybdate using this sensitive method. Molybdenum dioxide will not form if it isn't. The molybdenum hydroxide and potassium hydroxide solutions do not react with molybdenum. Molybdenum dioxide reacts under control with alkyl lithium to form an embedded (intercalation) compound, LixMoS2.

    Molybdenum disulfide preparation and methods
    By stirring molybdenum with hydrochloric or hydrofluoric under direct steam heating and washing with hot saline, centrifuging and drying, and then crushing, it can be made into a concentrate. In order to make ammonium trisulfide, hydrogen sulfide gases is used in the ammonium-molybdate solution. This can be made by adding hydrochloric to make it molybdenum thiomolybdate precipitation, washing, grinding, and then heating to 950 degrees C for desulfurization. Here are some preparation techniques: 1. The chosen method for flotation purification of molybdenum is called molybdenum-sulfide. Standard purity in the United States is between 40% and 50%. This refers to molybdenum's atomic composition. The standard purity = this purity *1.668. See below. After it has been washed, the acid is used to purify the solution and make sure that it remains at 59.92. This is the time when you can get a high-purity molybdenum dioxide. Recent research by the molybdenum sector has shown that high-purity molybdenum dioxide produced through the synthesis method is not lubricated well. This happens because molybdenum dishulfide is 2 S+1 Molybdenum atom. However, the structure of synthesis is unstable. It will have 1.9 sulfur and one molybdenum, respectively. Because of this, the lubrication can be unstable.

    Mollybdenum disulfide is used
    Molybdenum Disulfide (or Molybdenum disulfide) is a valuable solid lubricant. It's especially good for pressure and high temperatures. Diamagnetism makes it a good choice for a photoconductor, as well as a semiconductor that has P or N conductivity. The function also includes rectification, energy exchange, and diamagnetism. Molybdenum dioxide can also be used in a catalytic way to dry complex hydrocarbons. The "king" of solid lubricants, molybdenum disulfide is widely known. Molybdenum Disulfide (or molybdenum concentration powder) is a powder that's made of natural molybdenum powder. It has been chemically purified and modified the molecular structure. This product has black and silver gray colours, a shiny metallic appearance, and is not easily dissolved in water. This product is non-adhesive and has excellent dispersion. The product can be mixed with oil to make a colloidal solution that does not stick. This can improve the oil's lubricity as well as the extreme pressure. It can also be used in the mechanical operating state of high temperature and pressure at high speeds, as well as high loads to extend the equipment’s life.

    Prices for molybdenum disulfide
    Prices will depend on how small and pure the molybdenum sulfide is. The purchase volume may also have an effect on the price. Large quantities of high quality molybdenum disulfide will result in a lower price. On our official website, you can see the price of molybdenum sulfide.

    Molybdenum disulfide supplier
    The Advanc3dmaterials Advanced Material Nano Technology Co. Ltd. Luoyang City is located in China's Henan Province. (Advanc3dmaterials). This company supplies and manufactures high-quality chemical material worldwide. This company is a leader in the supply of high quality chemical materials and nanotechnology products, with more than 12 years experience. We are happy to provide high-quality, cost-effective molybdenum sulfide. Get in touch You can also inquire at any time.

    Inquiry us

    Products Category

    Innovative materials

    Cement foaming agent, also known as foaming concrete foaming agent, refers to an admixture that can reduce the surface tension of liquid and generate a large amount of uniform and stable foam for the production of foamed concrete. Foaming agent is a kind of substance that can make its aqueous...

    Molecular sieves

    Molecular sieve is a synthetic hydrated aluminosilicate (zeolite) or natural zeolite with the function of screening molecules.Zeolite molecular sieve has a complex and changeable structure and a unique pore system, and is a catalyst with excellent performance. Uses of Molecular Sieves Molecular sieve is mainly caused by molecular attraction, which...


    Any substance that dissolves in water and can significantly reduce the surface energy of water is called a surface active agent (surface active agent, SAA) or surface active substance. Surfactants reduce the surface tension of water by adsorbing at the gas-liquid two-phase interface, and can also reduce the oil-water interfacial...

    Lithium Battery Anode

    Lithium battery anode material are generally divided into carbon-based negative electrodes and non-carbon-based negative electrodes. Among them, carbon-based negative electrodes can be divided into graphite, hard carbon, and soft carbon negative electrodes. Graphite can be divided into artificial graphite, natural graphite, and mesocarbon microspheres; non-carbon The negative electrode includes lithium...

    MAX Phase

    The MAX phase is a new type of ternary layered compound, which is composed of three elements, M, A and X, and its general chemical formula is MN+1AXN, (wherein, M: pre-transition metal, A: Group A element, X: Carbon or nitrogen, N=1, 2, 3…), both metal materials (excellent electrical and thermal...

    Metal Alloy

    Alloy is a mixture with metallic properties synthesized by two or more metals and metals or non-metals by certain methods. Generally obtained by fusion into a homogeneous liquid and solidification. According to the number of constituent elements, it can be divided into binary alloys, ternary alloys and multi-element alloys. Two...


    Nanometer-scale structural materials are referred to as nanometer materials for short, which refer to the size of their structural units ranging from 1 nanometer to 100 nanometers. Since its size is close to the coherence length of electrons, its properties are greatly changed due to the self-organization brought about by...

    Stearic Acid Series

    Stearic acid, namely octadecanoic acid, molecular formula C18H36O2, is produced by the hydrolysis of oil and is mainly used to produce stearate. Dissolve each gram in 21ml of ethanol, 5ml of benzene, 2ml of chloroform or 6ml of carbon tetrachloride. Applications of Stearic acid Mainly used in the production of...

    Selenide Powder

    There is a typical antagonism between selenium and metals, and selenium with different valences can combine with metal ions to form metal selenides. Metal selenides have attracted much attention in recent years due to their excellent optoelectronic and catalytic properties, and have potential applications in solar cells, pollutant degradation, and...

    Telluride Powder

    Tellurium is a typical scattered element. Tellurium and its compounds are widely used in metallurgy, chemical industry, electronics, energy, medicine and health and other industries.Telluride is a compound of tellurium with a metal or a non-metal. Such as the representative of the telluride with a non-metal is hydrogen telluride, which...

    Silicide Powder

    Binary compounds formed by certain metals (such as lithium, calcium, magnesium, iron, chromium, etc.) and some non-metals (such as boron, etc.) and silicon. Generally crystalline, with metallic luster, hard and high melting point. Uses of Silicide Powder Metal silicide as an electric heating element is one of its earliest applications....

    Nitride Powder

    Nitride is similar to metal in appearance, hardness and conductivity, and generally has high hardness, high melting point, stable chemical properties, and electrical conductivity. Such as titanium nitride, vanadium nitride, zirconium nitride, tantalum nitride, etc. is hard and refractory, and has the characteristics of chemical corrosion resistance and high temperature...

    Carbide powder

    Carbide powder is a binary compound formed by carbon (other than hydrogen) which is smaller or similar to electronegativity. Carbides have a higher melting point. Most carbides are carbon and metal at high temperatures. The next reaction is obtained. The properties of the element are divided into metal carbides and...

    Oxide Powder

    Oxide powder is the chemical compound solid powder contains one oxygen and another element, such as metal oxides, metal oxides are a chemical compound formed between metals, specifically cations such as Na, K, Li, etc., and oxygen. These compounds require at least of two elements, as compounds do, and always...

    Sulfide Powder

    Sulfide powder refers to the chemical compounds powder with large families of inorganic and organic compounds, e.g. copper sulfide, Zinc sulfide, molybdenum disulfide, tungsten disulfide powders and so on. Sulfides and their similar compounds include a series of metals and semi-metallic elements combined with S, Se, Te, As, Sb, Bi...

    3D Printing Powder

    3D Printing powder are metal powders that are reduced to fine particles. 3D printing metal powder are the the preliminary base materials for most 3D printing processes that produce metallic parts. 3D printing, also known as additive manufacturing (AM), is the manufacturing of parts and products in a layer-by-layer fashion....

    Boride Powder

    Metallic boride powders are very unique but functional new ceramic materials.The boride powders have many advantages such as high melting point, high hardness, good electrical conductivity and thermal conductivity. Therefore, boride powder can be used as heat-resistant and hard materials that can be accurately processed by electric discharge machining. Such...


    Elementary substance is a pure chemical substance that consists of atoms belonging to a single chemical element, it is widely used in many industrial fields. Are you looking for high purity & quality elementary substance such as hafnium diboride powder, zirconium diboride powder, aluminum diboride powder, magnesium diboride powder? Biomedicalmaterialsprogram...

    Resent Products